AFC-Ingenieros

Contadores de Tiempo y Frecuencia

Modelo	Descripción
CNT-91 DataSheet	Fast 250,000 measurements/sec to internal memory Ultrahigh 50 ps single-shot time interval resolution 12 digits/sec frequency resolution 2,600 individual measurements/sec via GPIB/USB bus Internal memory storage of 3.5M measurments Zero dead-time frequency, period Continuous data streaming during, not after, measurements Graphic display and numeric presentation modes Programmable pulse output 0.5 Hz to 50 MHz Modulation Domain Analysis using TimeView software Frequency range to 300 MHz – options to 3, 8, 14 and 20 GHz
CNT-90XL DataSheet	Velocidad: 250k medidas/sec. a memoria interna CW and burst medidas de frecuencia y potencia Resolución: 14 digit display Análisis Estadístico incluyendo Histograma, Trend y Modulation Domain display Rango de Frecuencia: 27, 40, 46 o 60 GHz según modelo Facilidad de uso: Visualización de múltiples parámetros y representación en display de resultados Calidad Precio 2 instrumentos en uno–Microwave Counter/Analyzer & 300 MHz general-purpose timer/counter
CNT-90 DataSheet	250k measurements/s to internal memory & 750k stored measurement results in internal memory 2k measurements/s GPIB and USB measuring ratek High resolution of 100 ps (time), 12 digits/s (freq.), 0.001° (phase) 14 digits display Unique ease-of-use: Menu oriented settings and graphical presentation of results Frequency range: 300 MHz standard; 3, 8, 14 and 20 GHz optional USB and GPIB as standard Plug-and-play in existing test systems with 53131A emulation mode
CNT-80 Series	Fastest time and frequency measurements on the market Outstanding EMC properties for use in any test environment Capture frequency-hopping signals found in e.g. Bluetooth, wireless LANs etc NEW! 8 GHz Prescaler input, extending the frequency measuring range of the CNT-85/85R and the CNT-81/81R
CNT-85 -85R Series DataSheet	Easy-to-use and accurate frequency calibrators Ultimate stability with integrated atomic clock Versatile and portable. One counter fits all needs NEW! 8 GHz Prescaler input, extending the frequency measuring range of the CNT-85/85R and the CNT-81/81R
TimeView Software DataSheet	Analyze frequency or phase modulation Frequency range up to 20 GHz Find very small modulation components, where Spectrum Analyzers fail Very fast jitter characterization
XL 3000 DataSheet	Simultaneous frequency & power measurements Wide frequency range: 10 MHz-60 GHz Compact, portable, rugged and battery operated High stability oven-controlled Crystal timebases & ultra-stable Rubidium option Short acquisition time (<60 ms)

Patrones de Tiempo y Frecuencia

Patrones Controlados por GPS

Modelo

Descripción

GPS-12

GPS-disciplined Rubidium clock for near-Cesium stability
2.048 MHz, 1-pps standard outputs for telecom applications
1.544 MHz (T1) optional
1, 5 & 10 MHz optional low-noise outputs for general lab use
Truly Portable for field-use
Internal battery option for transportation and mains-free field use
Optional -48 VDC option for stationary use in telephone exchange stations

GPS 88/89

Only traceable GPS-controlled frequency standard on the market
User-friendly, incl. e.g. an analog satellite signal strength meter
Programmable pulse output and optional Ethernet Interface

Patrones de Funcionamiento Autónomo

Modelo

Descripción

6688 / 6689

Up to 11 other instruments can be supplied.
Both 10 and 5 MHz always included.
Portable ultra-stable Rubidium standard takes the stability to any desired location

Sistemas de Distribución

Modelo

Descripción

DA35 / DA36

Low loss enabling long path lengths up to 2 km
Lightweight, highly flexible small diameter cable
Immunity to electrical interference, incl. stroke of lightning and EMP
Non-conductive provides electrical isolation between transmitter and receiver module

Sincronización

Wandermeters

Modelo

Descripción

WM10 / 11

Verify conformance of sync clocks to ITU standards
-MTIE and TDEV masks
Portable troubleshooting tool- all included
-Rubidium time-base
-Ethernet Interface (WM-11)
- -48V DC supply (WM-11)
-Graphical display
-Sync clock output
Anyone can operate- no expert needed
-Very easy to use
-Self-adjusting Rubidium time-base
Affordable

Reloj de Sincronización de Red

Modelo

Descripción

SSU 32

GPS-locked Rubidium clock for ultimate stability (PRC)
Modular rack design with plug-in modules. Upgrade when need arises
Safe operation: Alarm output, redundant power supplies, SW monitoring

Wireless Test

Instrumentos de Alineación de Antenas

Modelo

Descripción

2261 A

Wideband receiver for spread-spectrum signal power measurement and potential interference identification.
890 to 940 MHz
2.400 to 2.500 GHz
3.400 to 4.200 GHz
4.900 to 6.000 GHz
Sensitivity is >-103 dBm typ. over all bands
Truly Portable for field-use

2220 / 2240

All models of the Path Align-R feature:
Four Tuneable Operating see model designations)
Path Loss displayed in dB (0.1 dB resolution/to -100 dB sensitivity), display updated every 300 ms
Tone Ranging: Switchable, provides variable-pitch indication of path loss
Continuous Talk and Listen over Link (Full-Duplex Voice, FM Mod.), headset included
Battery-powered Alignment Test Set (7 lbs/unit), charger included

Weather-resistant Instrument Back-pack included

Model 2200/2201 Band Frequencies:	Model 2240/2241 Band Frequencies:
Band 1: 1.8–2.5 GHz	Band 1: 1.8–2.5 GHz
Band 2: 5.8–6.6 GHz	Band 2: 3.5–5.0 GHz & 5.8–6.6 GHz
Band 3: 11.0–12.0 GHz	Band 3: 7.5–10.0 GHz & 11.0–12.0 GHz
Band 4: 18.1–19.4 GHz	Band 4: 18.1–19.4 GHz & 22.0–23.5 GHz